Skip to Content
G-R Performance LTD
SERVICES
Dyno / Remapping
Workshop and Service
SHOP
Engine Management
Exhaust Manifolds
Exhaust Systems
Fuel System
Wastegates / Actuators
Blow off Valves
GALLERY
Dyno
Track
Fabrication
CONTACT
0
0
G-R Performance LTD
SERVICES
Dyno / Remapping
Workshop and Service
SHOP
Engine Management
Exhaust Manifolds
Exhaust Systems
Fuel System
Wastegates / Actuators
Blow off Valves
GALLERY
Dyno
Track
Fabrication
CONTACT
0
0
Folder: SERVICES
Folder: SHOP
Folder: GALLERY
CONTACT
Back
Dyno / Remapping
Workshop and Service
Back
Engine Management
Exhaust Manifolds
Exhaust Systems
Fuel System
Wastegates / Actuators
Blow off Valves
Back
Dyno
Track
Fabrication
SHOP Ethanol Content Sensor (ECS)
1 / 3
Ethanol.png Image 1 of 3
Ethanol.png
Ethanol2.png Image 2 of 3
Ethanol2.png
Ethanol3.png Image 3 of 3
Ethanol3.png

Ethanol Content Sensor (ECS)

£205.00

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU. The sensor is fitted to the vehicle’s fuel return line anywhere between the fuel pressure regulator and the fuel tank.
 

  • AN-6 Fittings 

  • Includes plug and pin kit


 

Technical Specs

The pinout is indicated on the sensor itself (from left to right looking into connector on sensor) as :
1.) Vcc (+12V supply)
2.) GND (ground)
3.) Vout (digital signal out)

Quantity:
Add To Cart

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU. The sensor is fitted to the vehicle’s fuel return line anywhere between the fuel pressure regulator and the fuel tank.
 

  • AN-6 Fittings 

  • Includes plug and pin kit


 

Technical Specs

The pinout is indicated on the sensor itself (from left to right looking into connector on sensor) as :
1.) Vcc (+12V supply)
2.) GND (ground)
3.) Vout (digital signal out)

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU. The sensor is fitted to the vehicle’s fuel return line anywhere between the fuel pressure regulator and the fuel tank.
 

  • AN-6 Fittings 

  • Includes plug and pin kit


 

Technical Specs

The pinout is indicated on the sensor itself (from left to right looking into connector on sensor) as :
1.) Vcc (+12V supply)
2.) GND (ground)
3.) Vout (digital signal out)

You Might Also Like

NTC1-8.0.jpg NTC1-8.0.jpg NTC1-8.0.jpg
Coolant Temperature Sensor (NTC1-8)
£47.00
Hall.png Hall.png Hall.png
Hall Effect Sensor Kit
£58.00
NTC12.0.jpg NTC12.0.jpg NTC12.0.jpg
Coolant Temperature Sensor (NTC12)
£47.00
EGT.png
Exhaust Gas Temperature Probe (EGT)
£114.00
IAT1-8.0.jpg IAT1-8.0.jpg IAT1-8.0.jpg
Air Temp Sensor (IAT1-8)
£63.00

A19 Aven Industrial Park

Tickhill Road , Rotherham

S667QR

TEL : 01709 816682

MADE WITH SQUARESPACE

Ethanol.png
Ethanol2.png
Ethanol3.png